Skip to main content
Version: 1.3

Create VLAN on bonding interface during installation

Create VLAN#

Create a VLAN during the installation of CubeOS.

Configure network bonding, WARNING: do not use bond0, bond1, bondx as bonding name#

-- Network Bonding Settings ----------------------------------------------------Label          BusID   Driver  State    Speed--------------------------------------------------    IF.1   0000:02:00.0     bnx2     UP    1000F    IF.2   0000:02:00.1     bnx2   DOWN      N/A    IF.3   0000:03:00.0     bnx2   DOWN      N/A    IF.4   0000:03:00.1     bnx2   DOWN      N/A--------------------------------------------------1: Display policy2: Configure network bondingx: Exitp: Previous screenn: Next screen
Select option: 2
- Configure Network Bonding -Select action:1: Create2: Remove3: UpdateEnter index: 1Enter bonding interface name (required) [3-16 chars]: data0'data0' interface binds: <none>1: IF.12: IF.23: IF.34: IF.45: Clear6: SaveEnter index: 2'data0' interface binds: IF.21: IF.12: IF.23: IF.34: IF.45: Clear6: SaveEnter index: 3'data0' interface binds: IF.2 IF.31: IF.12: IF.23: IF.34: IF.45: Clear6: SaveEnter index: 6
binding interfaces IF.2 IF.3 to data0Press enter to continue:

Configure VLAN#

-- VLAN Settings ----------------------------------------------------Label          BusID   Driver  State    Speed--------------------------------------------------    IF.1   0000:02:00.0     bnx2     UP    1000F    IF.2   0000:02:00.1     bnx2   DOWN      N/A    IF.3   0000:03:00.0     bnx2   DOWN      N/A    IF.4   0000:03:00.1     bnx2   DOWN      N/A--------------------------------------------------1: Display policy2: Configure vlan networkx: Exitp: Previous screenn: Next screen
Select option: 2



- Configure VLAN Network -Select action:1: Create2: RemoveEnter index: 1Select an interface:1: IF.12: IF.43: data0Enter index: 3Enter vlan ID [1-4094]: 100Set vlan 100 for interface 'data0'

Configure IP address on data0.100(with VLAN tag)#

Make this interface the default interface?

  • Yes for external connection with internet access (gateway/router)
  • No for internal connection (no gateway/router)
-- Networking Settings ----------------------------------------------------Label          BusID   Driver  State    Speed--------------------------------------------------    IF.1   0000:02:00.0     bnx2     UP    1000F    IF.2   0000:02:00.1     bnx2   DOWN      N/A    IF.3   0000:03:00.0     bnx2   DOWN      N/A    IF.4   0000:03:00.1     bnx2   DOWN      N/A--------------------------------------------------1: Display device status2: Display policy3: Configure IF.14: Configure IF.45: Configure data06: Configure data0.100x: Exitp: Previous screenn: Next screen
Select option: 6



- Configure data0.100 -Enable this interface?1: Yes2: NoEnter index: 1Make this interface the default interface?1: Yes2: NoEnter index: 2Enter the IPv4 address: 192.168.100.10Enter the IPv4 subnet mask: 255.255.255.0

Summary#

SummaryPassword has not been modified.Host name: hp1data0:    IF.2    IF.3data0.100: vlan 100 on data0IF.1    Default interface.    IPv4 Mode:  Manual    IPv4 Address:   192.168.1.101    IPv4 Netmask:   255.255.255.0    IPv4 Gateway:   192.168.1.254    IPv6 Mode:  AutomaticIF.4    Interface disableddata0    IPv4 Mode:  Manual    IPv4 Address:    IPv4 Netmask:    IPv6 Mode:  Disableddata0.100    Master interface: data0    IPv4 Mode:  Manual    IPv4 Address:   192.168.100.10    IPv4 Netmask:   255.255.255.0    IPv6 Mode:  AutomaticDNS server 1: 8.8.8.8Time Zone: America/New_YorkDate: 08/05/2020Time: 02:42:04Role: control-convergedExternal IP/Domain: N/AManagement: IF.1Provider: IF.1Overlay: data0.100Storage: data0.100Domain/Region: default/RegionOneCube Secret Seed: bigstackManagement CIDR: 10.254.0.0/16High Availability: disabled
1: Accept the configuration2: Cancel the configuration3: Modify the configuration
Last updated on by Roy Tan