Create Network bonding during installation

Create network bonding

Create a bonding network interface during the installation of CubeOS.

Configure network bonding, WARNING: do not use bond0, bond1, bondx as bonding name

-- Network Bonding Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display policy
2: Configure network bonding
x: Exit
p: Previous screen
n: Next screen

Select option: 2

- Configure Network Bonding -
Select action:
1: Create
2: Remove
3: Update
Enter index: 1
Enter bonding interface name (required) [3-16 chars]: data0
'data0' interface binds: <none>
1: IF.1
2: IF.2
3: IF.3
4: IF.4
5: Clear
6: Save
Enter index: 2
'data0' interface binds: IF.2
1: IF.1
2: IF.2
3: IF.3
4: IF.4
5: Clear
6: Save
Enter index: 3
'data0' interface binds: IF.2 IF.3
1: IF.1
2: IF.2
3: IF.3
4: IF.4
5: Clear
6: Save
Enter index: 6

binding interfaces IF.2 IF.3 to data0
Press enter to continue:

Configure IP address on data0(bonding)

Make this interface the default interface?

• Yes for external connection with internet access (gateway/router)
• No for internal connection (no gateway/router)

-- Networking Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display device status
2: Display policy
3: Configure IF.1
4: Configure IF.4
5: Configure data0
x: Exit
p: Previous screen
n: Next screen

Select option: 5

- Configure data0 -
Enable this interface?
1: Yes
2: No
Enter index: 1
Make this interface the default interface?
1: Yes
2: No
Enter index: 2
Enter the IPv4 address: 192.168.10.10
Enter the IPv4 subnet mask: 255.255.255.0

Summary

Summary
Password has not been modified.
Host name: hp1
data0:
    IF.2
    IF.3
data0.10: vlan 10 on data0
IF.1
    Default interface.
    IPv4 Mode:  Manual
    IPv4 Address:   192.168.1.101
    IPv4 Netmask:   255.255.255.0
    IPv4 Gateway:   192.168.1.254
    IPv6 Mode:  Automatic
IF.4
    Interface disabled
data0
    IPv4 Mode:  Manual
    IPv4 Address:   192.168.10.10
    IPv4 Netmask:   255.255.255.0
    IPv6 Mode:  Automatic
data0.10
    Master interface: data0
    Interface disabled
DNS server 1: 1.1.1.1
Time Zone: Asia/Taipei
Date: 12/02/2020
Time: 13:54:19
Role: control-converged
External IP/Domain: N/A
Management: IF.1
Provider: IF.1
Overlay: data0
Storage: data0
Domain/Region: default/RegionOne
Cube Secret Seed: bigstack
Management CIDR: 10.254.0.0/16
High Availability: disabled

1: Accept the configuration
2: Cancel the configuration
3: Modify the configuration