Create VLAN during installation

Create VLAN

Create a VLAN is easy during the installation of Cube.COS.

Configure VLAN

-- VLAN Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display policy
2: Configure vlan network
x: Exit
p: Previous screen
n: Next screen

Select option: 2




- Configure VLAN Network -
Select action:
1: Create
2: Remove
Enter index: 1
Select an interface:
1: IF.1
2: IF.2
3: IF.3
4: IF.4
Enter index: 2
Enter vlan ID [1-4094]: 100
Set vlan 100 for interface 'IF.2'

Configure IP address on IF.2.100(with VLAN tag)

Make this interface the default interface?

• Yes for external connection with internet access (gateway/router)
• No for internal connection (no gateway/router)

-- Networking Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display device status
2: Display policy
3: Configure IF.1
4: Configure IF.2
5: Configure IF.3
6: Configure IF.4
7: Configure IF.2.100
x: Exit
p: Previous screen
n: Next screen

Select option: 7

- Configure IF.2.100 -
Enable this interface?
1: Yes
2: No
Enter index: 1
Make this interface the default interface?
1: Yes
2: No
Enter index: 2
Enter the IPv4 address: 192.168.100.10
Enter the IPv4 subnet mask: 255.255.255.0

Summary

Summary
Password has not been modified.
Host name: hp1
IF.2.100: vlan 100 on IF.2
IF.1
    Default interface.
    IPv4 Mode:  Manual
    IPv4 Address:   192.168.1.101
    IPv4 Netmask:   255.255.255.0
    IPv4 Gateway:   192.168.1.254
    IPv6 Mode:  Automatic
IF.2
    IPv4 Mode:  Manual
    IPv4 Address:
    IPv4 Netmask:
    IPv6 Mode:  Disabled
IF.3
    Interface disabled
IF.4
    Interface disabled
IF.2.100
    Master interface: IF.2
    IPv4 Mode:  Manual
    IPv4 Address:   192.168.100.10
    IPv4 Netmask:   255.255.255.0
    IPv6 Mode:  Automatic
DNS server 1: 1.1.1.1
Time Zone: Asia/Taipei
Date: 12/02/2020
Time: 13:54:19
Role: control-converged
External IP/Domain: N/A
Management: IF.1
Provider: IF.1
Overlay: IF.2.100
Storage: IF.2.100
Domain/Region: default/RegionOne
Cube Secret Seed: bigstack
Management CIDR: 10.254.0.0/16
High Availability: disabled

1: Accept the configuration
2: Cancel the configuration
3: Modify the configuration