Create VLAN on bonding interface during installation

Create VLAN

Create a VLAN during the installation of CubeOS.

Configure network bonding, WARNING: do not use bond0, bond1, bondx as bonding name

-- Network Bonding Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display policy
2: Configure network bonding
x: Exit
p: Previous screen
n: Next screen

Select option: 2

- Configure Network Bonding -
Select action:
1: Create
2: Remove
3: Update
Enter index: 1
Enter bonding interface name (required) [3-16 chars]: data0
'data0' interface binds: <none>
1: IF.1
2: IF.2
3: IF.3
4: IF.4
5: Clear
6: Save
Enter index: 2
'data0' interface binds: IF.2
1: IF.1
2: IF.2
3: IF.3
4: IF.4
5: Clear
6: Save
Enter index: 3
'data0' interface binds: IF.2 IF.3
1: IF.1
2: IF.2
3: IF.3
4: IF.4
5: Clear
6: Save
Enter index: 6

binding interfaces IF.2 IF.3 to data0
Press enter to continue:

Configure VLAN

-- VLAN Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display policy
2: Configure vlan network
x: Exit
p: Previous screen
n: Next screen

Select option: 2




- Configure VLAN Network -
Select action:
1: Create
2: Remove
Enter index: 1
Select an interface:
1: IF.1
2: IF.4
3: data0
Enter index: 3
Enter vlan ID [1-4094]: 100
Set vlan 100 for interface 'data0'

Configure IP address on data0.100(with VLAN tag)

Make this interface the default interface?

• Yes for external connection with internet access (gateway/router)
• No for internal connection (no gateway/router)

-- Networking Settings --
--------------------------------------------------
Label          BusID   Driver  State    Speed
--------------------------------------------------
    IF.1   0000:02:00.0     bnx2     UP    1000F
    IF.2   0000:02:00.1     bnx2   DOWN      N/A
    IF.3   0000:03:00.0     bnx2   DOWN      N/A
    IF.4   0000:03:00.1     bnx2   DOWN      N/A
--------------------------------------------------
1: Display device status
2: Display policy
3: Configure IF.1
4: Configure IF.4
5: Configure data0
6: Configure data0.100
x: Exit
p: Previous screen
n: Next screen

Select option: 6




- Configure data0.100 -
Enable this interface?
1: Yes
2: No
Enter index: 1
Make this interface the default interface?
1: Yes
2: No
Enter index: 2
Enter the IPv4 address: 192.168.100.10
Enter the IPv4 subnet mask: 255.255.255.0

Summary

Summary
Password has not been modified.
Host name: hp1
data0:
    IF.2
    IF.3
data0.100: vlan 100 on data0
IF.1
    Default interface.
    IPv4 Mode:  Manual
    IPv4 Address:   192.168.1.101
    IPv4 Netmask:   255.255.255.0
    IPv4 Gateway:   192.168.1.254
    IPv6 Mode:  Automatic
IF.4
    Interface disabled
data0
    IPv4 Mode:  Manual
    IPv4 Address:
    IPv4 Netmask:
    IPv6 Mode:  Disabled
data0.100
    Master interface: data0
    IPv4 Mode:  Manual
    IPv4 Address:   192.168.100.10
    IPv4 Netmask:   255.255.255.0
    IPv6 Mode:  Automatic
DNS server 1: 1.1.1.1
Time Zone: Asia/Taipei
Date: 12/02/2020
Time: 13:54:19
Role: control-converged
External IP/Domain: N/A
Management: IF.1
Provider: IF.1
Overlay: data0.100
Storage: data0.100
Domain/Region: default/RegionOne
Cube Secret Seed: bigstack
Management CIDR: 10.254.0.0/16
High Availability: disabled

1: Accept the configuration
2: Cancel the configuration
3: Modify the configuration