Startup

Single node or Cluster auto startup (New)

CubeOS starting bootstrap modules

Executing cluster start

Cluster ready

Check and repair services

• run CLI cluster> check_repair

CONTROL1> cluster
CONTROL1:cluster> check_repair
          Service  Status  Report
      ClusterLink      ok  [ link(v) clock(v) dns(v) ]
       ClusterSys      ok  [ bootstrap(v) license(v) ]
  ClusterSettings      ok  [ etcd(v) ]
        HaCluster  FIXING  [ hacluster(3) ]
                       ok  [ hacluster(f) ]
         MsgQueue      ok  [ rabbitmq(v) ]
           IaasDb      ok  [ mysql(v) ]
        VirtualIp      ok  [ vip(v) haproxy_ha(v) ]
          Storage      ok  [ ceph(v) ceph_mon(v) ceph_mgr(v) ceph_mds(v) ceph_osd(v) ceph_rgw(v) rbd_target(v) ]
       ApiService      ok  [ haproxy(v) httpd(v) lmi(v) memcache(v) ]
     SingleSignOn      ok  [ keycloak(v) ]
          Compute      ok  [ nova(v) ]
        Baremetal      ok  [ ironic(v) ]
          Network      ok  [ neutron(v) ]
            Image      ok  [ glance(v) ]
        BlockStor      ok  [ cinder(v) ]
         FileStor      ok  [ manila(v) ]
       ObjectStor      ok  [ swift(v) ]
    Orchestration      ok  [ heat(v) ]
            LBaaS      ok  [ octavia(v) ]
           DNSaaS      ok  [ designate(v) ]
           K8SaaS      ok  [ k3s(v) rancher(v) ]
       InstanceHa      ok  [ masakari(v) ]
 DisasterRecovery      ok  [ freezer(v) ]
    BusinessLogic      ok  [ mistral(v) murano(v) cloudkitty(v) senlin(v) watcher(v) ]
       ApiManager      ok  [ tyk(v) redis(v) mongodb(v) ]
         DataPipe      ok  [ zookeeper(v) kafka(v) ]
          Metrics      ok  [ monasca(v) telegraf(v) grafana(v) ]
     LogAnalytics      ok  [ filebeat(v) auditbeat(v) logstash(v) es(v) kibana(v) ]
    Notifications      ok  [ influxdb(v) kapacitor(v) ]
CONTROL1:cluster>

Single node manual startup

boot> bootstrap_cube

$ ssh admin@IPADDRESS
Warning: Permanently added '192.168.X.X' (ECDSA) to the list of known hosts.
Password:
Welcome to the Cube Appliance
Enter "help" for a list of available commands
controller> boot
controller:boot> bootstrap_cube
bootstraping cube...
if this is a single node start, just run "boot> cluster_sync"
if this is a cluster start, wait until bootstrap_done is done in all nodes
and run "cluster> start" to sync cluster data for all nodes
controller:boot>

boot> cluster_sync

controller:boot> cluster_sync
cluster_sync successfully

Run services checking & repair

CLI: cluster> check_repair

controller> cluster
controller:cluster> check_repair
          Service  Status  Report
      ClusterLink      ok  [ link(v) clock(v) dns(v) ]
       ClusterSys      ok  [ bootstrap(v) license(v) ]
  ClusterSettings      ok  [ etcd(v) ]
        HaCluster  FIXING  [ hacluster(3) ]
                       ok  [ hacluster(f) ]
         MsgQueue      ok  [ rabbitmq(v) ]
           IaasDb      ok  [ mysql(v) ]
        VirtualIp      ok  [ vip(v) haproxy_ha(v) ]
          Storage      ok  [ ceph(v) ceph_mon(v) ceph_mgr(v) ceph_mds(v) ceph_osd(v) ceph_rgw(v) rbd_target(v) ]
       ApiService      ok  [ haproxy(v) httpd(v) lmi(v) memcache(v) ]
     SingleSignOn      ok  [ keycloak(v) ]
          Compute      ok  [ nova(v) ]
        Baremetal      ok  [ ironic(v) ]
          Network      ok  [ neutron(v) ]
            Image      ok  [ glance(v) ]
        BlockStor      ok  [ cinder(v) ]
         FileStor      ok  [ manila(v) ]
       ObjectStor      ok  [ swift(v) ]
    Orchestration      ok  [ heat(v) ]
            LBaaS      ok  [ octavia(v) ]
           DNSaaS      ok  [ designate(v) ]
           K8SaaS      ok  [ k3s(v) rancher(v) ]
       InstanceHa      ok  [ masakari(v) ]
 DisasterRecovery      ok  [ freezer(v) ]
    BusinessLogic      ok  [ mistral(v) murano(v) cloudkitty(v) senlin(v) watcher(v) ]
       ApiManager      ok  [ tyk(v) redis(v) mongodb(v) ]
         DataPipe      ok  [ zookeeper(v) kafka(v) ]
          Metrics      ok  [ monasca(v) telegraf(v) grafana(v) ]
     LogAnalytics      ok  [ filebeat(v) auditbeat(v) logstash(v) es(v) kibana(v) ]
    Notifications      ok  [ influxdb(v) kapacitor(v) ]
controller:cluster>

---

Cluster manual startup

Control Node

Run link_check

run CLI boot> link_check to ensure all network links are connected

$ ssh admin@CONTROL1
Warning: Permanently added '192.168.X.X' (ECDSA) to the list of known hosts.
Password:
Welcome to the Cube Appliance
Enter "help" for a list of available commands
CONTROL1> boot
CONTROL1:boot> link_check
Ping 192.168.1.211 ... OK
Ping 192.168.1.212 ... OK
Ping 192.168.1.213 ... OK
Ping 192.168.10.211 ... OK
Ping 192.168.10.212 ... OK
Ping 192.168.10.213 ... OK

Start Up Order :

1. Run CLI cluster > stop (This steps is required if the cluster didn't perform a graceful shutdown)
2. On the first Node run CLI boot > bootstrap_cube, and WAIT for this process to complete before proceed to next steps

    CONTROL1> boot
    CONTROL1:boot> bootstrap_cube
    bootstraping cube...
    if this is a single node start, just run "boot> cluster_sync"
    if this is a cluster start, wait until bootstrap_done is done in all nodes
    and run "cluster> start" to sync cluster data for all nodes
    CONTROL1:boot>

3. When bootstrap_cube on first Node is complete, run CLI boot > bootstrap_cube on the 2nd and 3rd Nodes, You may run it parellel
4. Run CLI cluster> start on the first Node, Once bootstrap_cube on 2nd and 3rd Node is complete

    CONTROL1> cluster
    CONTROL1:cluster> start
             role                                           map
    ------------------------------------------------------------
              all     192.168.1.211,192.168.1.212,192.168.1.213
          control     192.168.1.211,192.168.1.212,192.168.1.213
          network     192.168.1.211,192.168.1.212,192.168.1.213
          compute     192.168.1.211,192.168.1.212,192.168.1.213
          storage     192.168.1.211,192.168.1.212,192.168.1.213
    ------------------------------------------------------------
    mark host 192.168.1.211 up
    mark host 192.168.1.212 up
    mark host 192.168.1.213 up
    cluster start successfully

5. Run services checking & repair, run CLI cluster> check_repair

CONTROL1> cluster
CONTROL1:cluster> check_repair
          Service  Status  Report
      ClusterLink      ok  [ link(v) clock(v) dns(v) ]
       ClusterSys      ok  [ bootstrap(v) license(v) ]
  ClusterSettings      ok  [ etcd(v) ]
        HaCluster  FIXING  [ hacluster(3) ]
                       ok  [ hacluster(f) ]
         MsgQueue      ok  [ rabbitmq(v) ]
           IaasDb      ok  [ mysql(v) ]
        VirtualIp      ok  [ vip(v) haproxy_ha(v) ]
          Storage      ok  [ ceph(v) ceph_mon(v) ceph_mgr(v) ceph_mds(v) ceph_osd(v) ceph_rgw(v) rbd_target(v) ]
       ApiService      ok  [ haproxy(v) httpd(v) lmi(v) memcache(v) ]
     SingleSignOn      ok  [ keycloak(v) ]
          Compute      ok  [ nova(v) ]
        Baremetal      ok  [ ironic(v) ]
          Network      ok  [ neutron(v) ]
            Image      ok  [ glance(v) ]
        BlockStor      ok  [ cinder(v) ]
         FileStor      ok  [ manila(v) ]
       ObjectStor      ok  [ swift(v) ]
    Orchestration      ok  [ heat(v) ]
            LBaaS      ok  [ octavia(v) ]
           DNSaaS      ok  [ designate(v) ]
           K8SaaS      ok  [ k3s(v) rancher(v) ]
       InstanceHa      ok  [ masakari(v) ]
 DisasterRecovery      ok  [ freezer(v) ]
    BusinessLogic      ok  [ mistral(v) murano(v) cloudkitty(v) senlin(v) watcher(v) ]
       ApiManager      ok  [ tyk(v) redis(v) mongodb(v) ]
         DataPipe      ok  [ zookeeper(v) kafka(v) ]
          Metrics      ok  [ monasca(v) telegraf(v) grafana(v) ]
     LogAnalytics      ok  [ filebeat(v) auditbeat(v) logstash(v) es(v) kibana(v) ]
    Notifications      ok  [ influxdb(v) kapacitor(v) ]
CONTROL1:cluster>

Compute Node

Run boot> bootstrap_cube

    $ ssh admin@COMPUTE1
    Warning: Permanently added '192.168.X.X' (ECDSA) to the list of known hosts.
    Password:
    Welcome to the Cube Appliance
    Enter "help" for a list of available commands
    COMPUTE1> boot
    COMPUTE1:boot> bootstrap_cube
    bootstraping cube...
    if this is a single node start, just run "boot> cluster_sync"
    if this is a cluster start, wait until bootstrap_done is done in all nodes
    and run "cluster> start" to sync cluster data for all nodes
    COMPUTE1:boot>

Run boot> cluster_sync

    COMPUTE1> boot
    COMPUTE1:boot> cluster_sync
    (1/9) processing: ceph
    (2/9) processing: keystone
    (3/9) processing: neutron
    (4/9) processing: nova
    (5/9) processing: cinder
    (6/9) processing: manila
    (7/9) processing: octavia
    (8/9) processing: haproxy
    (9/9) processing: telegraf
    cluster_sync successfully